Instrument Lock Drilling Proof Testing Machine Mechanical Anti - Theft Door Lock Detection Plug Door Lock Detection

Instrument lock drilling proof testing machine mechanical anti-theft door lock detection plug door lock detection

1, Equipment Overview: the lock anti drilling testing machine is mainly used for destructive testing of intelligent electronic locks, mechanical anti-theft locks, plug-in locks and other products.

2, Main technical parameters:

1. Control part: PLC controls destructive test by adding specified pressure to electric drill through air pump. Record the failure time and pressure;

2. Test method: fix the lock head on the jig of bench drill, test drill from the key position with a high-speed drill bit ≤ 12mm, and the drill shall not be penetrated within 3-5 minutes;

3. Anti drilling test of lock: the rotation speed range of main shaft is 0-800 r.p.m;

4. Motor speed: 0-1800 r.p.m;

5. Lock anti drilling test: electric drill pressure: ≤ 300N (± 5%);

6. Anti drilling test of lock: use high-speed drill with diameter ≤ 12mm;

7. Drive motor: ≥ 12.5n/m step motor;

8. X-axis travel (left and right movement of main shaft): ≥ 200mm;

9. Z-axis travel (spindle moving up and down): ≥ 100mm;

10. Rotation angle of axis A: 360 degrees;

11. Distance from the end face of the main shaft to the working surface: ≤ 120mm;

12. Table size (length x width): 300 * 280mm;

13. Maximum bearing capacity: 20kg;

14. Drilling diameter range: 0-12mm;

15. Overall dimension: (w * D * h) 1300 * 800 * 1700mm;

16. Weight: about 420kg;

17. Equipment power supply: AC220V, 50 / 60Hz; 1.8kw.

abrasion resistance test machine

tv signal tester

Instrument Lock Drilling Proof Testing Machine Mechanical Anti - Theft Door Lock Detection Plug Door Lock Detection Images